CoolSculpting in Boulder City is a revolutionary technology that uses a precisely controlled cooling method called Cryolipolysis which targets, cools and eliminates fat cells. After a CoolSculpting procedure the body continues to break down the treated fat cells, now in a crystallized or frozen state, leading to fat cell death. Over the next two to four months they are naturally flushed from the body.
CoolSculpting procedure is designed to target and destroy 20%-25% of the fat cells in the treated area. Diet, exercise and other procedures may shrink fat cells, leaving an open opportunity to increase the size of those same fat cells from a lifestyle shift. Fat cells freeze at higher temperatures than surrounding tissues. Cool Sculpting technology safely delivers precisely controlled cooling to gently and effectively target the fat cells underneath the skin. Over the course of the following weeks after your treatment, your body processes the fat and eliminates it from the body naturally. While dieting and exercise makes the fat cells smaller, this fat freezing procedure gets rid of them completely, allowing you to enjoy positive and long-lasting results of CoolSculpting!
Am I a Good Candidate for CoolSculpting in Boulder City?
What is Coolsculpting?
Men and women are having body slimming results without going under the knife or taking supplements. Target those fatty areas on your midsection, arms, legs and back. There is a procedure that only requires a small amount of time and an appointment at your local med spa. It is simple and relatively quick. Coolsculpting is a noninvasive, non-surgical procedure that uses cooling plates, applied to specific areas on the body, to essentially freeze unwanted fat cells.
How does Coolsculpting work and is it safe?
The overwhelming safety of this procedure is the most compelling feature and here is the detailed Coolsculpting guide which helps you to understand the complete process. Coolsculpting has been featured in magazines, television programs, and broadcasting. Coolsculpting uses a thermoelectric cooling device that is applied to problem areas to eliminate excess fat. Studies have shown that fat cells are effectively damaged by controlled cooling. The frozen fat cells will then dissolve and the body will digest them. In the following weeks after the procedure, your body will naturally eliminate these damaged fat cells.
A doctor or certified technician will perform the procedure in their facility. The client is asked to sit in a reclining position while the device is placed on the area where fats need treatment. The treatment is done while the patient is awake. There very little discomfort associated with thermoelectric cooling. Naturally, the technician will ask that the patient sit still and get comfortable to sit for one or more hours depending on how many treatment areas there are. Patients can read a book, watch a movie, or play on their phone or tablet during treatment.
The device has two plates and a vacuum suction. The vacuum sucks up flaps of skin trapping fat cells between the plates. Applied precision cooling destroys the fat cells targeted. There is a massage feature on some Coolsculpting machines. If the technician recommends it, the patient will feel the massages sensation as well. The massaging function is used to help alleviate discomfort, and massage the cells so they can be better treated. In the time following the Coolsculpting, these targeted cells will die off and the body will naturally rid itself of them.
This is the only FDA approved treatment of its kind. Most clients do not feel discomfort, only minor pulling sensation and tingling. What makes this treatment so unique is that the device only affects the fat cells. Surrounding skin tissue, muscle, and fat is completely unaffected. This can be a concern for fit people who may be afraid of the muscle tissue being shrunk or affected. Clients can expect long lasting results, and many are satisfied after only one treatment. Each area requires a 1-hour session of Coolsculpting.
When will Coolsculpting results be seen?
Naturally, clients and technicians alike love seeing the results! Although the Coolsculpting treatment is relatively quick, the results will be slow to start. Many clients reported seeing a visible shrinking of the treated area within 1–2 months. Others continue to see improvement up to 6 months after the first treatment. Subsequent treatments can be performed for further definition of a problem area. Although, it should be noted that one session is sometimes all it takes to achieve the desired results. It is helpful to take a before picture ahead of the first Coolsculpting treatment. Wear something that shows the area to be treated clearly and wholly. Most facilities will take the picture for you and for their files.
Each corresponding session or follow up appointment with the technician, additional picture should be taken. This way there is photo documentation of the results and improves tone, tightening, and flattening of the treated areas.
Are there any side effects of Coolsculpting that patients should be aware of?
Knowing what to expect after the first Coolsculpting session is essential. The doctor or technician will go over all the side effects in the initial consultation. The Food and Drug Association approved Coolsculpting in 2012. In their reporting, no adverse side effects were found. Patients have reports stinging, tingling, or cramping at the treated area. Bruising can sometimes be expected as well, because folds of skin are being essentially pinched between the Coolsculpting suction plates. Bruising and sore areas will subside in days or weeks after the last performed procedure. It is reported that clients with small and targeted areas see the best results. Larger areas are not to be treated, as this can lead to uneven appearance. The best candidates for Coolsculpting are those men and women who have problem areas on the body. In most cases, the fat cells will be eliminated permanently.
What is the Coolsculpting treatment cost?
Costs will vary per treatment per area. Depending on where you are receiving treatment, and weather a certified technician or a doctor is performing it, a single Coolsculpting session starts at $500 and goes up from there. If the technician believes more than one treatment will be needed, the client will be informed at the time of the initial consultation.
What is the suggested wait time between Coolsculpting sessions?
After a successful session of Coolsculpting, many patients want to know when they can get another session, or start on another problem area. Most facilities offering Coolsculpting suggest waiting 4–8 weeks between sessions. For specific more difficult areas, and optimal results, the technician may recommend a series of sessions. Following the trained professional’s advice and recommendations will lead to the best results for the patient.
Where is Coolsculpting being offered?
The popularity of Coolsculpting is evident in the fact that so many health centers, med spas, and doctor offices have it available. With successful results and comfortable treatment experiences, this sought after treatment is being widely used to help people look and feel their best. The treatment will only be done by a trained professional, who has experience with the device and its functions.
SculpSure vs CoolSculpting
Know Everything About Coolsculpting Treatment — Pros, Cons, Results & CostThis Cool Sculpting review will get you up to speed about what it can do, and if it really works. The science-based company has developed a new medical device designed to help you lose fat in specific trouble areas. This non-invasive procedure, called Cool Sculpting, was created based on the basic concept is to apply extreme COLD temperatures to the fatty area of the body to safely eliminate fat from the body.
How does it work?
The Cool Sculpting process is performed in a doctor's office but does not involve any needles or anesthetics. The procedure begins by using a suction applicator where portions of the skin are sucked up into the applicator. At this point, the cooling process begins causing your skin to be in contact with temperatures that are high enough to transform the fat from a liquid to a solid. Once in the solid formed, the fat cells will slowly begin to be destroyed and will safely be processed through the body.
Does it hurt?
Throughout the procedure there is virtually no pain, some claim to feel a "pulling" or "tugging" effect on their skin but it goes away within about 10 minutes.This should not be considered a weight loss procedure and is only done for those patients who are just slightly overweight. I'll stress in this Cool Sculpting review that yes, it is approved by the FDA but be careful of copy cat procedures and be Absolutely sure to use a real DOCTOR who is experienced in performing the Cool Sculpting procedure.
Currently only certain parts of the body are able to have this treatment done including:
tummy, love handles, back, inner thighs, chin, arms and legs. Zeltiq is currently working on improving the device to allow it to treat other areas of the body, so again, you want to talk with your doctor about any area of your body you want help with.
Other Cool Sculpting reviews have also noted that certain patients have been able to see success with Cool Sculpting, averaging about twenty to forty percent fat loss. While you will begin to see results in about four to six weeks, it may take up to three months to see your full results. Many people are happy with the success of their first procedure but you are able to have up to three procedures done on each area of your body. To add safety to the treatment, there is a required one or two month waiting period between procedures. However, Cool Sculpting methods are VERY expensive and does not actually cure the problem of obesity. Finding a well-rounded exercise and nutrition plan that will get you long-term results is the healthiest approach to losing weight.